The "Aqua-Mate" series of submersible pumps is designed for use in residential or light commercial dewatering and wastewater applications and can be used to transfer effluent or raw sewage. The innovative vortex impeller design reduces the risk of clogging and allows each pump to pass 2 in spherical solids. These pumps are constructed of a non-corrodible engineered plastic motor housing, pump housing, base and impeller. All models are constructed with all stainless steel screws and automatic models feature a stainless steel switch arm and a solid polypropylene float. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance! This attention to detail is an inherent feature of every pump in this series, making it one of the most reliable in the industry.

Zoeller® Submersible Pump, Single Seal, Series: Aqua-Mate, 82 gpm, 115 VAC, 5.5 A, 4/10 hp, 19-1/2 ft Maximum Head, Float Switch, 2 in NPT Discharge Pipe, Specifications: 1 ph, 2 Pole, Class B Insulation, 110 deg F, 2 in Solid Handling, Plastic, 3400 rpm Motor

• Submersible pumps for sewage/effluent or dewatering, pass 2 in spherical solids, 2 in NPT discharge
• No sheet metal parts to rust or corrode
• All stainless steel screws, switch arm and lower motor housing
• 2-pole float operated mechanical switch
• Solid polypropylene float
• 110 deg F maximum temperature for dewatering
• On point - 13 in, off point - 5-3/4 in
• All models completely submersible and hermetically sealed
• Watertight and dust tight
• Sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non-automatic pumps
• Reserve powered design
• For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump
• 10 ft auto/15 ft non auto, 3-prong plug cord type
• Auto reset thermal overload motor protection
• Upper and lower ball bearing
• Engineered plastic for pump housing/base/impeller
• Carbon and ceramic for mechanical seals, non-clogging vortex impeller type, stainless steel hardware, 410 stainless steel motor shaft, Buna-N O-ring gasket

• Catalog https://hs-beta.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zoeller_M211_Catalog.pdf
• Instruction/Installation Manual https://hs-beta.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zoeller_M211_Manual.pdf
• Specification Sheet https://hs-beta.cimm2.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zoeller_M211_Specification_Sheet.pdf